Your plans are much more valuable to us

Mold Making

The mold phase involves the production of molds for casting the elements to be produced. Molds are manufactured from polyester, wood or steel material according to the characteristic of the project.

Carcass Construction

3H PREKAST Façade Panels and decorative elements carcass manufacturing, all carcass is stitched and flex anchors are completely galvanized after welding, forming a totally galvanized system.


In our panels and all other productions, we use Cem-FIL® alkaline resistant fibers developed for fiber reinforced concrete. All special spray systems used for casting are imported from the UK.

Thermal insulation

Our panels use aluminum foil rock wool, which is a lightweight but heat, sound insulation and fire resistant insulation material compared to its counterparts. Thus, the heat-insulated panel weight brings about a half of the load to the building, compared to the weight of the equivalent heat-insulated panels. (3H PREKAST Thermal Insulated Façade Panel weight is 50-55 Kg / m². It is in class A1 fireproofing which is required by the Taşyünü fire regulation.)


The finished facade elements are installed in the building as well as in Europe and America. This system allows the loads that may arise during a possible earthquake to be swapped for displacements. Quality control precast elements are applied by professional assembly teams according to the installation planning and schedule.


Contact us 3H PREKAST, which combines innovative solutions with quality...


GENERAL CENTER: Adnan Kahveci Mah. Yavuz Sultan Selim Bulvarı Perla Vista Sitesi A Blok D: 69 Beylikdüzü / İSTANBUL

ANATOLIAN OFFICE: Sur Yapı Eksen İstanbul Sitesi Tantavi Mahallesi Estergon Caddesi F Blok Kat:1 D:34 Ümraniye/İSTANBUL

FACTORY: Alipaşa Mh. Pehlivan Arif Sk. No:15 Silivri/İSTANBUL


Tel: (0212) 663 02 72-73 Fax: (0212) 653 23 67 Factory Tel: (0212) 716 51 94